- Plastics & Automation Industry
- Nile Air Nipper
- CF / CL series
CF / CL series
-
CF type
Turtle-Neck Blade type – Machine mounting type
-
CF type
Turtle-Neck Blade type – Machine mounting type
-
CF type
Turtle-Neck Blade type – Machine mounting type
-
CL type
Turtle-Neck Blade type – Machine mounting type
-
CL type
Turtle-Neck Blade type – Machine mounting type
-
CL type
Turtle-Neck Blade type – Machine mounting type
CF specification / Blade cutting capacity (Фmm)
| Model (less blade) |
Weight (g) |
Airconsumption (cm3/stroke) |
Air pressure (MPa) |
Blades (*)Carbide tipped |
Copper wire |
Steel wire |
Stainless wire |
Pino wire |
Crimping | Plastic | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Soft | Hard | ||||||||||
| CF5 | 570 | 265 | 0.4 – 0.5 | S2, S2S, CR2, EP2 | 1.0 | 0.5 | – | – | – | – | – |
| *, Z2S, ZCR2, ZEP2 | 1.0 | 0.5 | 0.3 | 0.3 | – | – | – | ||||
| F1, F1S, FD1, FEP2 | – | – | – | – | – | 2.0 | – | ||||
| CF10 | 940 | 436 | 0.4 – 0.5 | S4, S4S, CR4, EP4 | 1.6 | 1.0 | – | – | – | – | – |
| Z4*, Z4S, ZCR4, ZEP4 | 1.6 | 1.0 | 0.5 | 0.5 | – | – | – | ||||
| F3, F3S, FD3, F3LS, FEP4 | – | – | – | – | – | 0.4 | 2.6 | ||||
| Y4 | – | – | – | – | – | – | – | ||||
| CF20 | 1,300 | 792 | 0.5 – 0.6 | S5, S5S, P6, CR6, EP6 | 2.6 | 2.0 | 1.6 | – | – | – | – |
| Z6*, Z6S, ZCR6, ZEP6 | 2.6 | 2.0 | 1.6 | 1.0 | – | – | – | ||||
| F5, F5S, FD5, F5LS, FEP6 | – | – | – | – | – | 7.0 | 5.0 | ||||
| Y6, K6 | – | – | – | – | – | – | – | ||||
| Model (less blade) |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
F (mm) |
G (mm) |
H (mm) |
I (mm) |
J (mm) |
K (mm) |
L (mm) |
M (mm) |
N (mm) |
O (mm) |
P (mm) |
Q (mm) |
R (mm) |
S (mm) |
T (mm) |
U (mm) |
V (mm) |
W (mm) |
X (mm) |
Y (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CF5 | 124 | 54 | 44 | 44 | 47 | 28 | 80 | 15 | 10 | 19 | 16 | 33 | 31 | 7 | 8 | 10 | 45 | 32 | M6 | 7 | 20 | 30 | 18 | G1/4 | 30 |
| CF10 | 146 | 64 | 54 | 54 | 54 | 34 | 100 | 15 | 10 | 21 | 26 | 40 | 34 | 7 | 8 | 16 | 60 | 40 | M6 | 9 | 20 | 30 | 19 | G1/4 | 30 |
| CF20 | 165 | 70 | 62 | 62 | 62 | 42 | 117 | 15 | 10 | 23 | 26 | 55 | 36 | 9 | 8 | 16 | 75 | 40 | M6 | 12 | 26 | 34 | 21 | G1/4 | 30 |
CL specification / Blade cutting capacity (Фmm)
| Model (less blade) |
Weight (g) |
Airconsumption (cm3/stroke) |
Air pressure (MPa) |
Blades (*)Carbide tipped |
Copper wire |
Steel wire |
Stainless wire |
Pino wire |
Crimping | Plastic | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Soft | Hard | ||||||||||
| CL5 | 650 | 137 | 0.4 – 0.5 | S2, S2S, CR2, EP2 | 1.0 | 0.5 | – | – | – | – | – |
| Z2*, Z2S, ZCR2, ZEP2 | 1.0 | 0.5 | 0.3 | 0.3 | – | – | – | ||||
| F1, F1S, FD1, FEP2 | – | – | – | – | – | 2.0 | – | ||||
| CL10 | 1,050 | 253 | 0.4 – 0.5 | S4, S4S, CR4, EP4 | 1.6 | 1.0 | – | – | – | – | – |
| Z4*, Z4S, ZCR4, ZEP4 | 1.6 | 1.0 | 0.5 | 0.5 | – | – | – | ||||
| F3, F3S, FD3, F3LS, FEP4 | – | – | – | – | – | 4.0 | 2.6 | ||||
| Y4 | – | – | – | – | – | – | – | ||||
| CL20 | 1,450 | 501 | 0.5 – 0.6 | S5, S5S, P6, CR6, EP6 | 2.6 | 2.0 | 1.6 | – | – | – | – |
| Z6*, Z6S, ZCR6, ZEP6 | 2.6 | 2.0 | 1.6 | 1.0 | – | – | – | ||||
| F5, F5S, FD5, F5LS, FEP6 | – | – | – | – | – | 7.0 | 5.0 | ||||
| Y6, K6 | – | – | – | – | – | – | – | ||||
| Model (less blade) |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
F (mm) |
G (mm) |
H (mm) |
I (mm) |
J (mm) |
K (mm) |
L (mm) |
M (mm) |
N (mm) |
O (mm) |
P (mm) |
Q (mm) |
R (mm) |
S (mm) |
T (mm) |
U (mm) |
V (mm) |
W (mm) |
X (mm) |
Y (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CL5 | 165 | 60 | 44 | 59 | 59 | 30 | 73 | 35 | 7 | 50 | 18 | 37 | 18 | 7 | 8 | 9 | 55 | 59 | M6 | 7 | 20 | 30 | 23 | G1/4 | 30 |
| CL10 | 187 | 70 | 54 | 70 | 70 | 36 | 88 | 35 | 7 | 57 | 23 | 40 | 25 | 7 | 8.5 | 15 | 58 | 72 | M6 | 9 | 20 | 34 | 28.5 | G1/4 | 30 |
| CL20 | 205 | 80 | 62 | 80 | 80 | 42 | 104 | 30 | 8 | 63 | 28 | 50 | 26 | 9 | 10 | 18 | 70 | 80 | M6 | 12 | 26 | 40 | 32.5 | G1/4 | 30 |
