TPJ series

    • Two-stage bellows type
    • Pad diameter (Φ6mm ~ Φ80mm)
    • The bellows construction is suitable for curved workpieces.
    • Conductive pads available (nitrile, silicon)
    • Lightweight type available (54% lighter than our other comparable products)

Specification

Specification of pad-type

Specification of pad-type

Specification of pad-rubber type

Specification of pad-rubber type

Table of pad diameters and spring strokes

Table of pad diameters and spring strokes

TPJ series details

TPJseries Ф6 & Ф8

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

  • Vertical-vacuum-outlet spring type (type TS)

    Vertical-vacuum-outlet spring type (type TS)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet spring type (type YS)

    Horizontal-vacuum-outlet spring type (type YS)

    Drawing of Metal fittings (holders)

  • TPJG-6

    TPJG-6

    Drawing of Rubber pieces (pads)
    Insertion type

  • TPJG-8

    TPJG-8

    Drawing of Rubber pieces (pads)
    Insertion type

Dimension list (mm)
Type A B E S Weight(g)
TPJTK-6 6 33 11
TPJTK-8 8 33 11
TPJYK-6 6 31.5 16
TPJYK-8 8 31.5 16
TPJTS-6-3 6 40 6 3 13
TPJTS-6-10 6 54 20 10 16
TPJTS-6-15 6 64 30 15 17
TPJTS-6-25 6 84 50 25 21
TPJTS-8-3 8 40 6 3 13
TPJTS-8-10 8 54 20 10 16
TPJTS-8-15 8 64 30 15 17
TPJTS-8-25 8 84 50 25 21
TPJYS-6-3 6 53.5 6 3 28
TPJYS-6-10 6 67.5 20 10 31
TPJYS-6-15 6 77.5 30 15 33
TPJYS-6-25 6 97.5 50 25 38
TPJYS-8-3 8 53.5 6 3 28
TPJYS-8-10 8 67.5 20 10 31
TPJYS-8-15 8 77.5 30 15 33
TPJYS-8-25 8 97.5 50 25 38

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

TPJseries Ф10, Ф15 & Ф20

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

  • Vertical-vacuum-outlet spring type (type TS)

    Vertical-vacuum-outlet spring type (type TS)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet spring type (type YS)

    Horizontal-vacuum-outlet spring type (type YS)

    Drawing of Metal fittings (holders)

  • TPJG-10

    TPJG-10

    Drawing of Rubber pieces (pads)
    Set screw type

  • TPJG-15

    TPJG-15

    Drawing of Rubber pieces (pads)
    Set screw type

  • TPJG-20

    TPJG-20

    Drawing of Rubber pieces (pads)
    Set screw type

  • Set-screw for TPJG-10, 15

    Set-screw for TPJG-10, 15

    Drawing of Rubber pieces (pads)
    Dimensions of set-screw

  • Set-screw for TPJG-20

    Set-screw for TPJG-20

    Drawing of Rubber pieces (pads)
    Dimensions of set-screw

Dimension list (mm)
Type A B E S Weight(g)
TPJTK-10 10 47.5 14
TPJTK-15 15 49 15
TPJTK-20 20 51 17
TPJYK-10 10 31.5 17
TPJYK-15 15 33 18
TPJYK-20 20 35 20
TPJTS-10-4 10 55.5 8 4 20
TPJTS-10-10 10 67.5 20 10 23
TPJTS-10-20 10 87.5 40 20 28
TPJTS-10-30 10 107.5 60 30 33
TPJTS-15-4 15 57 8 4 21
TPJTS-15-10 15 69 20 10 24
TPJTS-15-20 15 89 40 20 29
TPJTS-15-30 15 109 60 30 34
TPJTS-20-4 20 59 8 4 23
TPJTS-20-10 20 71 20 10 26
TPJTS-20-20 20 91 40 20 30
TPJTS-20-30 20 111 60 30 36
TPJYS-10-4 10 61.5 8 4 36
TPJYS-10-10 10 73.5 20 10 40
TPJYS-10-20 10 93.5 40 20 47
TPJYS-10-30 10 113.5 60 30 54
TPJYS-15-4 15 63 8 4 37
TPJYS-15-10 15 75 20 10 41
TPJYS-15-20 15 95 40 20 48
TPJYS-15-30 15 115 60 30  
TPJYS-20-4 20 65 8 4 39
TPJYS-20-10 20 77 20 10 43
TPJYS-20-20 20 97 40 20 50
TPJYS-20-30 20 117 60 30 54

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

TPJseries Ф30 & Ф40

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

  • Vertical-vacuum-outlet spring type (type TS)

    Vertical-vacuum-outlet spring type (type TS)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet spring type (type YS)

    Horizontal-vacuum-outlet spring type (type YS)

    Drawing of Metal fittings (holders)

  • TPJG-30

    TPJG-30

    Drawing of Rubber pieces (pads)
    Set screw type

  • TPJG-40

    TPJG-40

    Drawing of Rubber pieces (pads)
    Set screw type

  • Set screw fot TPF-30, 40

    Set screw fot TPF-30, 40

    Drawing of Rubber pieces (pads)

Dimension list (mm)
Type A B E S Weight(g)
TPJTK-30 30 66 42
TPJTK-40 40 66 44
TPJYK-30 30 50 46
TPJYK-40 40 50 48
TPJTS-30-6 30 75 13 6 44
TPJTS-30-15 30 92 30 15 56
TPJTS-30-30 30 122 60 30 72
TPJTS-30-50 30 162 100 50 92
TPJTS-40-6 40 75 13 6 47
TPJTS-40-15 40 92 30 15 59
TPJTS-40-30 40 122 60 30 76
TPJTS-40-50 40 162 100 50 99
TPJYS-30-6 30 91 13 6 83
TPJYS-30-15 30 108 30 15 94
TPJYS-30-30 30 138 60 30 110
TPJYS-30-50 30 178 100 50 134
TPJYS-40-6 40 91 13 6 86
TPJYS-40-15 40 108 30 15 95
TPJYS-40-30 40 138 60 30 114
TPJYS-40-50 40 178 100 50 139

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

TPJ series Ф50

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

  • Vertical-vacuum-outlet spring type (type TS)

    Vertical-vacuum-outlet spring type (type TS)

    Drawing of Metal fittings (holders)

    (The fittings are the same for Ф30mm, Ф40mm)

  • Horizontal-vacuum-outlet spring type (type YS)

    Horizontal-vacuum-outlet spring type (type YS)

    Drawing of Metal fittings (holders)

  • TPJG-50

    TPJG-50

    Drawing of Rubber pieces (pads)
    Set screw type

  • Set-screw M8 for TPJ-50

    Set-screw M8 for TPJ-50

    Drawing of Rubber pieces (pads)
    The size depends on thetype (only the TPJTS-50 type (vertical vacuum outlet with a spring) uses M6)

  • Set-screw M6 for TPJ-50

    Set-screw M6 for TPJ-50

    Drawing of Rubber pieces (pads)
    The size depends on thetype (only the TPJTS-50 type (vertical vacuum outlet with a spring) uses M6)

Dimension list (mm)
Type A B E S Weight(g)
TPJTK-50 50 68 58
TPJYK-50 50 52 62
TPJTS-50-6 50 77 13 6 65
TPJTS-50-15 50 94 30 15 77
TPJTS-50-30 50 124 60 30 95
TPJTS-50-50 50 164 100 50 117
TPJYS-50-6 50 110 13 6 100
TPJYS-50-15 50 140 30 15 109
TPJYS-50-30 50 180 60 30 128
TPJYS-50-50 50 175 100 50 153

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

TPJ series Ф60,Ф70 & Ф80

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

  • Vertical-vacuum-outlet spring type (type TS)

    Vertical-vacuum-outlet spring type (type TS)

    Drawing of Metal fittings (holders)

    (The fittings are the same for Ф30mm, Ф40mm)

  • Horizontal-vacuum-outlet spring type (type YS)

    Horizontal-vacuum-outlet spring type (type YS)

    Drawing of Metal fittings (holders)

  • TPJG-60

    TPJG-60

    Drawing of Rubber pieces (pads)
    Set screw type

  • TPJG-70

    TPJG-70

    Drawing of Rubber pieces (pads)
    Set screw type

  • TPJG-80

    TPJG-80

    Drawing of Rubber pieces (pads)
    Set screw type

Dimension list (mm)
Type A B E S Weight (g)
TPJTK-60 60 62.5 144
TPJTK-70 70 63.5 163
TPJTK-80 80 63.5 190
TPJYK-60 60 62.5 139
TPJYK-70 70 63.5 158
TPJYK-80 80 63.5 185
TPJTS-60-10 60 114.5 20 10 191
TPJTS-60-30 60 154.5 60 30 215
TPJTS-60-50 60 194.5 100 50 240
TPJTS-60-70 60 234.5 140 70 265
TPJTS-70-10 70 115.5 20 10 210
TPJTS-70-30 70 155.5 60 30 234
TPJTS-70-50 70 195.5 100 50 259
TPJTS-70-70 70 235.5 140 70 284
TPJTS-80-10 80 115.5 20 10 237
TPJTS-80-30 80 155.5 60 30 261
TPJTS-80-50 80 195.5 100 50 286
TPJTS-80-70 80 235.5 140 70 311
TPJYS-60-10 60 114.5 20 10 230
TPJYS-60-30 60 154.5 60 30 259
TPJYS-60-50 60 194.5 100 50 289
TPJYS-60-70 60 234.5 140 70 319
TPJYS-70-10 70 115.5 20 10 249
TPJYS-70-30 70 155.5 60 30 278
TPJYS-70-50 70 195.5 100 50 308
TPJYS-70-70 70 235.5 140 70 338
TPJYS-80-10 80 115.5 20 10 276
TPJYS-80-30 80 155.5 60 30 305
TPJYS-80-50 80 195.5 100 50 335
TPJYS-80-70 80 235.5 140 70 365

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

Official SNS