- Chucking Parts
- TPC series
TPC series
-
- Three-stage bellows type
- Pad diameter (Φ10mm ~ Φ90mm)
- The three-stage bellows construction is suitable for bars and curved workieces, and cushions the shock when a workpiece is absorbed.
- Lightweight type available (54% lighter than our other comparable products)
Specification
Specification of pad-type
Specification of pad-rubber type
TPC series details
TPC series Ф10, Ф15, Ф18 & Ф20
-
Vertical-vacuum-outlet type (type TK)
Drawing of Metal fittings (holders)
-
Horizontal-vacuum-outlet type (type YK)
Drawing of Metal fittings (holders)
-
TPCG-10
Drawing of Rubber pieces (pads)
-
TPCG-15
Drawing of Rubber pieces (pads)
-
TPCG-18
Drawing of Rubber pieces (pads)
-
TPCG-20
Drawing of Rubber pieces (pads)
-
TN-01
Drawing of set screws
| Dimension list (mm) | ||
| Type | Ａ | Ｂ |
|---|---|---|
| TCPTK-10 | 9 | 56.2 |
| TCPTK-15 | 15.2 | 64.2 |
| TCPTK-18 | 18.7 | 64.2 |
| TCPTK-20 | 20 | 64.2 |
| TCPYK-10 | 9 | 40.2 |
| TCPYK-15 | 15.2 | 48.2 |
| TCPYK-18 | 18.7 | 48.2 |
| TCPYK-20 | 20 | 48.2 |
[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke
TPC series Ф30, Ф40 & Ф60
-
Vertical-vacuum-outlet type (type TK)
Drawing of Metal fittings (holders)
-
Horizontal-vacuum-outlet type (type YK)
Drawing of Metal fittings (holders)
-
TPCG-30
Drawing of Rubber pieces (pads)
-
TPCG-40
Drawing of Rubber pieces (pads)
-
TPCG-60
Drawing of Rubber pieces (pads)
-
TN-02 (M8)
Drawing of set screws
Standard set-screw is TN-02 (M8). Please indicate about TN-03 (M6).
-
TN-03 (M6)
Drawing of set screws
Standard set-screw is TN-02 (M8). Please indicate about TN-03 (M6).
| Dimension list (mm) | ||
| Type | A | B |
|---|---|---|
| TPCTK-30 | 32 | 86.8 |
| TPCTK-40 | 42 | 95.3 |
| TPCTK-60 | 62 | 104.3 |
| TPCYK-30 | 32 | 70.8 |
| TPCYK-40 | 42 | 79.3 |
| TPCYK-60 | 62 | 88.3 |
[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke
TPC series 90
-
Vertical-vacuum-outlet type (type TK)
Drawing of Metal fittings (holders)
-
Horizontal-vacuum-outlet type (type YK)
Drawing of Metal fittings (holders)
-
TPCG-90
Drawing of Rubber pieces (pads)
-
TN-04
Drawing of set screws
| Dimension list (mm) | ||
| Type | A | B |
|---|---|---|
| TPCTK-90 | 88 | 144.8 |
| TPCYK-90 | 88 | 144.8 |
[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke
