TPF series TKY Suction Pads

    • Basic type
    • Pad diameter (Φ2mm ~ Φ200mm)
    • Suitable for flat workpieces
    • Conductive pads available (nitrile, silicon)
    • Lightweight type available (54% lighter than our other comparable products)

Specification

Specification of pad-type

Specification of pad-type

Specification of pad-rubber type

Specification of pad-rubber type

Table of pad diameters and spring strokes

Table of pad diameters and spring strokes

TPF series details

TPF series Ф2 & Ф3.5

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

  • Vertical-vacuum-outlet spring type (type TS)

    Vertical-vacuum-outlet spring type (type TS)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet spring type (type YS)

    Horizontal-vacuum-outlet spring type (type YS)

    Drawing of Metal fittings (holders)

  • TPFG-2A

    TPFG-2A

    Drawing of Rubber pieces (pads)
    Insertion type

  • TPFG-3.5A

    TPFG-3.5A

    Drawing of Rubber pieces (pads)
    Insertion type

Dimension list (mm)
Type A B E S Weight (g)
TPFTK-2A 2 23.5 8
TPFTK-3.5A 3.5 23.5 8
TPFYK-2A 2 20 3
TPFYK-3.5A 3.5 20 3
TPFTS-2A-2.5 2 28.5 5.1 2.5 8
TPFTS-2A-5 2 33.5 10.1 5 8
TPFTS-3.5A-2.5 3.5 28.5 5.1 2.5 8
TPFTS-3.5A-5 3.5 33.5 10.1 5 8
TPFYS-2A-2.5 2 35.7 4.5 2.5 6
TPFYS-2A-5 2 40.7 9.5 5 7
TPFYS-3.5A-2.5 3.5 35.7 4.5 2.5 6
TPFYS-3.5A-5 3.5 40.7 9.5 5 7

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

TPF series 2 x 4

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

  • TPFG-2 x 4

    TPFG-2 x 4

    Drawing of Rubber pieces (pads)
    Bonding type (old metal fixtures are used for thepad specified below..)

Dimension list (mm)
Type A B E S Weight (g)
TPFTK-2×4 2×4 24.7 8
TPFYK-2×4 2×4 21.7 3
TPFTS-2×4-2.5 2×4 28.7 5.1 2.5 8
TPFTS-2×4-5 2×4 33.7 10.1 5 8
TPFYS-2×4-2.5 2×4 37.4 4.5 2.5 7
TPFYS-2×4-5 2×4 42.4 9.5 5 7

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

TPF series 3.5 x 7

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

  • Vertical-vacuum-outlet spring type (type TS)

    Vertical-vacuum-outlet spring type (type TS)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet spring type (type YS)

    Horizontal-vacuum-outlet spring type (type YS)

    Drawing of Metal fittings (holders)

  • TPFG-3.5 x 7

    TPFG-3.5 x 7

    Drawing of Rubber pieces (pads)
    Bonding type (old metal fixtures are used for thepad specified below..)

Dimension list (mm)
Type A B E S Weight (g)
TPFTK-3.5×7 3.5×7 25.5 8
TPFYK-3.5×7 3.5×7 22.5 3
TPFTS-3.5×7-2.5 3.5×7 29.5 5.1 2.5 8
TPFTS-3.5×7-5 3.5×7 34.5 10.1 5 8
TPFYS-3.5×7-2.5 3.5×7 38.2 4.5 2.5 7
TPFYS-3.5×7-5 3.5×7 43.2 9.5 5 7

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

TPF series Ф5, Ф6 & Ф8

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

    (The fittings are the same for 10A)

  • Vertical-vacuum-outlet spring type (type TS)

    Vertical-vacuum-outlet spring type (type TS)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet spring type (type YS)

    Horizontal-vacuum-outlet spring type (type YS)

    Drawing of Metal fittings (holders)

  • TPFG-5A

    TPFG-5A

    Drawing of Rubber pieces (pads)
    Insertion type

  • TPFG-6A

    TPFG-6A

    Drawing of Rubber pieces (pads)
    Insertion type

  • TPFG-8A

    TPFG-8A

    Drawing of Rubber pieces (pads)
    Insertion type

Dimension list (mm)
Type A Ｂ E S Weight(g)
TPFTK-5A 5 30.5 11
TPFTK-6A 6 30.5 11
TPFTK-8A 8 31 11
TPFYK-5A 5 29 16
TPFYK-6A 6 29 16
TPFYK-8A 8 29.5 16
TPFTS-5A-3 5 37.5 6 3 13
TPFTS-5A-10 5 51.5 20 10 16
TPFTS-5A-15 5 61.5 30 15 17
TPFTS-5A-25 5 81.5 50 25 21
TPFTS-6A-3 6 37.5 6 3 13
TPFTS-6A-10 6 51.5 20 10 16
TPFTS-6A-15 6 61.5 30 15 17
TPFTS-6A-25 6 81.5 50 25 21
TPFTS-8A-3 8 38 6 3 13
TPFTS-8A-10 8 52 20 10 16
TPFTS-8A-15 8 62 30 15 17
TPFTS-8A-25 8 82 50 25 21
TPFYS-5A-3 5 51 6 3 28
TPFYS-5A-10 5 65 20 10 31
TPFYS-5A-15 5 75 30 15 33
TPFYS-5A-25 5 95 50 25 38
TPFYS-6A-3 6 51 6 3 28
TPFYS-6A-10 6 65 20 10 31
TPFYS-6A-15 6 75 30 15 33
TPFYS-6A-25 6 95 50 25 38
TPFYS-8A-3 8 51.5 6 3 28
TPFYS-8A-10 8 65.5 20 10 31
TPFYS-8A-15 8 75.5 30 15 33
TPFYS-8A-25 8 95.5 50 25 38

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

TPF series Ф10

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

    (The fittings are the same for 5A ~ 8A)

  • Vertical-vacuum-outlet spring type (type TS)

    Vertical-vacuum-outlet spring type (type TS)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet spring type (type YS)

    Horizontal-vacuum-outlet spring type (type YS)

    Drawing of Metal fittings (holders)

  • TPFG-10A

    TPFG-10A

    Drawing of Rubber pieces (pads)
    Insertion type

Dimension list (mm)
Type A Ｂ E S Weight (g)
TPFTK-10A 10 46 15
TPFYK-10A 10 30 16
TPFTS-10A-4 10 56.5 8 4 26
TPFTS-10A-10 10 68.5 20 10 31
TPFTS-10A-20 10 88.5 40 20 34
TPFTS-10A-30 10 108.5 60 30 41
TPFYS-10A-4 10 60 8 4 43
TPFYS-10A-10 10 72 20 10 48
TPFYS-10A-20 10 92 40 20 55
TPFYS-10A-30 10 112 60 30 62

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

TPF series Ф15 & Ф20

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

    (The fittings are the same for 5A ~ 8A)

  • Vertical-vacuum-outlet spring type (type TS)

    Vertical-vacuum-outlet spring type (type TS)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet spring type (type YS)

    Horizontal-vacuum-outlet spring type (type YS)

    Drawing of Metal fittings (holders)

  • TPF-15

    TPF-15

    Drawing of Rubber pieces (pads)

  • set screw for TPF-15

    set screw for TPF-15

    Drawing of Rubber pieces (pads)

  • TPF-20

    TPF-20

    Drawing of Rubber pieces (pads)

  • set screw for TPF-20

    set screw for TPF-20

    Drawing of Rubber pieces (pads)

Dimension list (mm)
Type A Ｂ E S Weight (g)
TPFTK-15 15 46 20
TPFTK-20 20 48 20
TPFYK-15 15 30 20
TPFYK-20 20 32 20
TPFTS-15-4 15 54 8 4 28
TPFTS-15-10 15 66 20 10 31
TPFTS-15-20 15 86 40 20 36
TPFTS-15-30 15 106 60 30 42
TPFTS-20-4 20 56 8 4 28
TPFTS-20-10 20 68 20 10 31
TPFTS-20-20 20 88 40 20 38
TPFTS-20-30 20 108 60 30 43
TPFYS-15-4 15 60 8 4 44
TPFYS-15-10 15 72 20 10 48
TPFYS-15-20 15 92 40 20 55
TPFYS-15-30 15 112 60 30 63
TPFYS-20-4 20 62 8 4 48
TPFYS-20-10 20 74 20 10 50
TPFYS-20-20 20 94 40 20 57

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

TPF series Ф25,Ф30,Ф35 & Ф40

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

  • Vertical-vacuum-outlet spring type (type TS)

    Vertical-vacuum-outlet spring type (type TS)

    Drawing of Metal fittings (holders)

    (The fittings are the same for Ф25mm)

  • Horizontal-vacuum-outlet spring type (type YS)

    Horizontal-vacuum-outlet spring type (type YS)

    Drawing of Metal fittings (holders)

  • TPFG-25

    TPFG-25

    Drawing of Rubber pieces (pads)
    Set-screw type

  • TPFG-30

    TPFG-30

    Drawing of Rubber pieces (pads)
    Set-screw type

  • TPFG-35

    TPFG-35

    Drawing of Rubber pieces (pads)
    Set-screw type

  • TPFG-40

    TPFG-40

    Drawing of Rubber pieces (pads)
    Set-screw type

  • set screw fot TPF-20 ~ 40

    set screw fot TPF-20 ~ 40

    Drawing of Rubber pieces (pads)
    Set-screw type

Dimension list (mm)
Type A Ｂ E S Weight(g)
TPFTK-25 25 62 40
TPFTK-30 30 60 40
TPFTK-35 35 62 40
TPFTK-40 40 62 40
TPFYK-25 25 46 40
TPFYK-30 30 44 40
TPFYK-35 35 46 40
TPFYK-40 40 46 50
TPFTS-25-6 25 71 13 6 55
TPFTS-25-15 25 88 30 15 60
TPFTS-25-30 25 118 60 30 73
TPFTS-25-50 25 158 100 50 89
TPFTS-30-6 30 69 13 6 55
TPFTS-30-15 30 86 30 15 61
TPFTS-30-30 30 116 60 30 73
TPFTS-30-50 30 156 100 50 90
TPFTS-35-6 35 71 13 6 55
TPFTS-35-15 35 88 30 15 64
TPFTS-35-30 35 118 60 30 76
TPFTS-35-50 35 158 100 50 93
TPFTS-40-6 40 71 13 6 55
TPFTS-40-15 40 88 30 15 66
TPFTS-40-30 40 118 60 30 79
TPFTS-40-50 40 158 100 50 95
TPFYS-25-6 25 87 13 6 93
TPFYS-25-15 25 104 30 15 102
TPFYS-25-30 25 134 60 30 120
TPFYS-25-50 25 174 100 50 143
TPFYS-30-6 30 85 13 6 93
TPFYS-30-15 30 102 30 15 103
TPFYS-30-30 30 132 60 30 120
TPFYS-30-50 30 172 100 50 145
TPFYS-35-6 35 87 13 6 96
TPFYS-35-15 35 104 30 15 105
TPFYS-35-30 35 134 60 30 123
TPFYS-35-50 35 174 100 50 147
TPFYS-40-6 40 87 13 6 99
TPFYS-40-15 40 104 30 15 108
TPFYS-40-30 40 134 60 30 126
TPFYS-40-50 40 174 100 50 149

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

TPF series Ф50

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

  • Vertical-vacuum-outlet spring type (type TS)

    Vertical-vacuum-outlet spring type (type TS)

    Drawing of Metal fittings (holders)

    (The fittings are the same for Ф25mm ~ Ф40mm)

  • Horizontal-vacuum-outlet spring type (type YS)

    Horizontal-vacuum-outlet spring type (type YS)

    Drawing of Metal fittings (holders)

  • TPFG-50

    TPFG-50

    Drawing of Rubber pieces (pads)
    Set-screw type

    (Only the TPFTS-50 type (vertical vacuum outlet with a spring) uses M6.)

  • Set-serew M8 for TPF-50

    Set-serew M8 for TPF-50

    Drawing of Rubber pieces (pads)
    The size depends on the type

  • Set-serew M6 for TPF-50

    Set-serew M6 for TPF-50

    Drawing of Rubber pieces (pads)
    The size depends on the type

Dimension list (mm)
Type A Ｂ E S Weight(g)
TPFTK-50 50 63 50
TPFYK-50 50 47 55
TPFTS-50-6 50 72 13 6 85
TPFTS-50-15 50 89 30 15 89
TPFTS-50-30 50 119 60 30 95
TPFTS-50-50 50 159 100 50 103
TPFYS-50-6 50 88 13 6 103
TPFYS-50-15 50 105 30 15 112
TPFYS-50-30 50 135 60 30 130
TPFYS-50-50 50 175 100 50 154

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

TPF series Ф60, Ф80 & Ф95

  • Vertical-vacuum-outlet type (type TK)

    Vertical-vacuum-outlet type (type TK)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders)

  • Vertical-vacuum-outlet spring type (type TS)

    Vertical-vacuum-outlet spring type (type TS)

    Drawing of Metal fittings (holders)

  • Horizontal-vacuum-outlet spring type (type YS)

    Horizontal-vacuum-outlet spring type (type YS)

    Drawing of Metal fittings (holders)

  • TPFG-60

    TPFG-60

    Drawing of Rubber pieces (pads)
    Screw type

    (Only the TPFTS-50 type (vertical vacuum outlet with a spring) uses M6.)

  • TPFG-80

    TPFG-80

    Drawing of Rubber pieces (pads)
    Screw type

  • TPFG-95

    TPFG-95

    Drawing of Rubber pieces (pads)
    Screw type

Dimension list (mm)
Type A Ｂ E S Weight(g)
TPFTK-60 60 58.5 130
TPFTK-80 80 60.5 170
TPFTK-95 93 61 220
TPFYK-60 60 58.5 120
TPFYK-80 80 60.5 160
TPFYK-95 93 61 210
TPFTS-60-10 60 110.5 20 10 172
TPFTS-60-30 60 150.5 60 30 196
TPFTS-60-50 60 190.5 100 50 214
TPFTS-60-70 60 230.5 140 70 238
TPFTS-80-10 80 112.5 20 10 208
TPFTS-80-30 80 152.5 60 30 233
TPFTS-80-50 80 192.5 100 50 250
TPFTS-80-70 80 232.5 140 70 275
TPFTS-95-10 93 113 20 10 241
TPFTS-95-30 93 153 60 30 265
TPFTS-95-50 93 193 100 50 283
TPFTS-95-70 93 233 140 70 307
TPFYS-60-10 60 110.5 20 10 211
TPFYS-60-30 60 150.5 60 30 245
TPFYS-60-50 60 190.5 100 50 277
TPFYS-60-70 60 230.5 140 70 289
TPFYS-80-10 80 112.5 20 10 248
TPFYS-80-30 80 152.5 60 30 283
TPFYS-80-50 80 192.5 100 50 307
TPFYS-80-70 80 232.5 140 70 317
TPFYS-95-10 93 113 20 10 280
TPFYS-95-30 93 153 60 30 317
TPFYS-95-50 93 193 100 50 339
TPFYS-95-70 93 233 140 70 350

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

TPF series Ф100

  • Horizontal-vacuum-outlet type (type YK) Rubber not removable

    Horizontal-vacuum-outlet type (type YK) Rubber not removable

    Drawing of Metal fittings (holders) with rubber piece

  • Horizontal-vacuum-outlet spring type (type YS) Rubber not removable

    Horizontal-vacuum-outlet spring type (type YS) Rubber not removable

    Drawing of Metal fittings (holders) with rubber piece

Dimension list (mm)
Type A Ｂ E S Weight (g)
TPFYK-100 Refer to 
above drawing		 140
TPFYS-100-15 100 106 30 15 353
TPFYS-100-30 100 136 60 30 395
TPFYS-100-50 100 176 100 50 459
TPFYS-100-70 100 216 140 70 523

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

TPF series Ф120,Ф150 & Ф200

  • Horizontal-vacuum-outlet type (type YK)

    Horizontal-vacuum-outlet type (type YK)

    Drawing of Metal fittings (holders) with rubber piece

  • Horizontal-vacuum-outlet spring type (type YS)

    Horizontal-vacuum-outlet spring type (type YS)

    Drawing of Metal fittings (holders) with rubber piece

  • TPFG-120

    TPFG-120

    Drawing of Rubber pieces (pads)
    Four screw type

    (Only the TPFTS-50 type (vertical vacuum outlet with a spring) uses M6.)

  • TPFG-150

    TPFG-150

    Drawing of Rubber pieces (pads)
    Four screw type

  • TPFG-200

    TPFG-200

    Drawing of Rubber pieces (pads)
    Four screw type

Dimension list (mm)
Type A Ｂ E S Weight(g)
TPFYK-120 120 75.5 640
TPFYK-150 150 82.5 910
TPFYK-200 200 87.5 1200
TPFYS-120-20 120 203.5 75 20 1240
TPFYS-120-100 120 293.5 165 100 1440
TPFYS-150-20 150 210.5 75 20 1480
TPFYS-150-100 150 300.5 165 100 1680
TPFYS-200-20 200 215.5 75 20 1800
TPFYS-200-100 200 305.5 165 100 2000

[Note]
Dimension E : Total length of the spring
Dimension S : Spring stroke

Official SNS