Air Micro Angle Grinder

  • MAG-121N

    MAG-121N

    AIR MICRO ANGLE GRINDER
    Code No. 5003109

    (120° ANGLE TYPE)
    FOR PRECISION GRINDING AND POLISHING

    48,000rpm
    Max.size(*1)
    154 x φ16.7
    Air pressure supply
    0.4MPa - 0.6MPa
    The amount of air consumption (per min.)
    120NL/min
    Weight
    140g

    Set of package
    MAG-121N / Air hose1.5m / Hose band 2 pcs / Quick joint / Over hose / Set pin / Wrench / Mounted point10mm

  • MAG-122N

    MAG-122N

    AIR MICRO ANGLE GRINDER
    Code No. 5003108

    (120° ANGLE TYPE)
    FOR SURFACE GRINDING AND POLISHING

    35,000rpm
    Max.size(*1)
    149 x φ16.7
    Air pressure supply
    0.4MPa-0.6MPa
    The amount of air consumption (per min.)
    120NL/min
    Weight
    140g

    Set of package
    MAG-122N / Air hose1.5m / Hose band 2 pcs / Quick joint / Over hose / Set pin / Wrench / φ20 cups grinding wheel 1 pcs.

  • MAG-091N

    MAG-091N

    AIR MICRO ANGLE GRINDER
    Code No. 50031400

    (90° ANGLE TYPE)
    FOR SURFACE GRINDING AND POLISHING

    48,000rpm
    Max.size(*1)
    114 x φ17.4
    Air pressure supply
    0.4MPa-0.6MPa
    The amount of air consumption (per min.)
    120NL/min
    Weight
    116g

    Set of package
    MAG-091N / Air hose1.5 / Hose band 2 pcs. / Quick joint / Over hose / Set pin / Wrench /φ10 Mounted point NSL 2 pcs. / Lap shaft / Mounted New Soft Laps 2pcs. / New Soft Lap discs 7pcs. / φ10Pol-Per system / Shank Mounted Rubber pad

  • MAG-093N

    MAG-093N

    AIR MICRO ANGLE GRINDER
    Code No. 5003106

    (90° ANGLE TYPE)
    FOR SURFACE GRINDING AND POLISHING

    23,500rpm
    Max.size(*1)
    139 x φ16.7
    Air pressure supply
    0.4MPa-0.6MPa
    The amount of air consumption (per min.)
    120NL/min
    Weight
    160g

    Set of package
    MAG-093N / Air hose1.5m / Hose band 2 pcs / Quick joint / Over hose / Set pin / φ30 cups grinding wheel 1 pcs.

  • MAG-123N

    MAG-123N

    AIR MICRO ANGLE GRINDER
    Code No. 5003107

    (120° ANGLE TYPE)
    FOR SURFACE GRINDING AND POLISHING

    23,500rpm
    Max.size(*1)
    152 x φ16.7
    Air pressure supply
    0.4MPa-0.6MPa
    The amount of air consumption (per min.)
    120NL/min
    Weight
    175g

    Set of package
    MAG-123N / Air hose1.5m / Hose band 2 pcs / Quick joint / Over hose / Set pin / φ30 cups grinding wheel 1 pcs.

*1 : Not including tip tools

Characteristics

  • 120 and 90 degrees angles are prepared based on the human engineering.

  • The unpleasant noise is reduced, which tends to come out by the angle type.

  • Abundant tip tools correpond to various uses.

Official SNS