UF-0101
Ultrasonic Finishing System ULTRAFORM UF-0101
In ARGOFILE’s history, the most powerful and most delicate machine “ULTRAFORM UF-0101” is ready to be on the market now. Max. output power is 100W so that the rough polishing and grinding can be made aggressively.
On the other hand, you can adjust the amplitude under 1 micron and Ultra-fine polishing can be done in NANO function.
Anybody can operate without special training. You just connect the hand piece cord to the controller and also connect the motor cord with AC power supply source. Then, you can operate it. It is very easy.
On the other hand, This “ULTRAFORM UF-0101” satisfies the expert and skilled polishers as the professional use.
As other features of ULTRAFORM UF-0101 :
– 2 types of the ultrasonic hand pieces are prepared for your application, one is the Large-sized hand piece No. UF-7401 is very powerful. Another type is very light and compact sized hand piece No.UF-9701.
– Also, the detachable motor cord is adopted therefore even if the motor cord is snapping (broken), it is easy to replace it by new one.
– Polishing mode can be selected by one-touch button (CLAMP button).
*The Hard mode keeps a constant vibration level against the working pressure and you can polish the work piece aggressively.
*The Soft mode automatically reduces vibration depending on the working pressure and it can prevent the excessive grinding. This soft mode is suitable for delicate work.
– Amplitude value can be adjusted by 99 steps preciously.
– Operator can check the status of ultrasonic vibration visibly in the built-in LCD monitor.
– Even if the operator forgot switching off the machine, the Auto-Power-Off function ensures the safety by turning off the power, etc., etc.
UF-0101 | |
---|---|
![]() |
|
User-friendly operation screenManual mode* Menu screen** |
|
From rough grinding to ultra-fine polishing![]() Two types of polishing modes (Hard/Soft) are alternately available on a single set. The Hard mode keeps a constant vibration level against the thrust forces applied to the tool, thus leading to powerful polishing. The Soft mode automatically reduces vibration depending on the thrust force applied to the tool, thus preventing excessive grinding. This mode is suitable for delicate work. |
|
“NANO mode” for ultra-fine work![]() Equipped with a new function "NANO mode", which enables ultra-fine amplitude control, the UF-0101 has raised the level of ultrasonic polishing work to a more intricate finish that was only achieved by hand. |
|
Handpiece with Different CharacteristicsA single oscillator can be used with two handpiece types and for various functions. |
UF-0101 ALL-AROUND SET |
---|
From rough grinding to ultra-fine Polishing – one set can do them all! |
![]() |
Specification of UF-0101(Oscillator) | |
Frequency | 17- 31 kHz Automatic feedback |
Maximum output | 100W |
Amplitude adjustment | 99 steps |
Power supply | Single phase AC100 to 250V 50/60Hz |
Electricity consumption | 300VA |
Outer dimensions | 226W×252D×180H (mm) |
Weight | 5.2kg |
UF-0101 ALL-AROUND SET consists of |
|
Set Contents
UF-0101 TOUGH SETUF-0101 with UF-7401 |
---|
![]() |
Specification of UF-7401 (Hand piece) | |
Tool attachment screw | M8 |
Cord length | Curled cord 1.7 M Detachable type |
Outer dimension | φ40 x 150 L mm |
Weight | 350 grams |
UF-0101 ALL-AROUND SET consists of |
|
(1) Diamond abrasive stone (W: 60) (2) Diamond abrasive stone (W: 20) (3) Tool clamp (Flat) (4) New Superstones (Flat) |
UF-0101 NANO SETUF-0101 with UF-9701 |
---|
![]() |
Specification of UF-9701 (Hand piece) | |
Tool attachment screw | M6 (with M6-M4 Adaptor) |
Cord length | Curled cord 1.7 M Detachable type |
Outer dimension | Φ28 x 118.5 L mm |
Weight | 150 grams |
UF-0101 ALL-AROUND SET consists of |
|
(1) Tool clamp (for flat / round) (2) New Superstones (flat) (3) New Superstones (round) (4) Diamond files (long) (5) Diamond files (6) Diamond files (cone) (7) Diamond stones (flat) |